GT Sport, Monroe's proven Reflex advanced suspension technology meets King Springs race bred market leading performance to provide lowered performance shock absorbers with outstanding street appeal.
Monroe's reliability and King Springs' durability combine to offer improved vehicle aesthetics and optimum on-road performance in the perfect solution for affordable height and ride customisation in aftermarket vehicles.
Designed with control and quality in mind, GT Sport achieves the desirable look of a lowered vehicle profile while providing optimum performance and control.
The ride height when compared with original equipment springs and shock absorbers when the vehicle was new is an average of 25-30 millimetres lower for the Monroe GT Sport with a 'Low' spring and 40-50 millimetres when fitted with a 'Super Low' spring.
The GT Sport product complements properly engineered vehicles. By lowering a vehicle, you are modifying it significantly, which brings other important factors such as wheel size into play.
Note - the length of the shock absorber plays no part in lowering the car. It's all down to the height of the spring.
Front strut type - In most cases, both the body and the rod have been shortened to match the lowered ride height generated by the shorter spring. The shortened body gives extra bump travel while the shorter rod ensures the shorter coil spring is not loose when fully extended.
Rear shock type - Again, in most cases the body and rod have been shortened. The main reason for the shorter rod, and hence the shorter overall shock length, is to ensure the coil spring is retained at all times and does not become loose when fully extended. Typically, the bump rubbers are separate from both the spring and shock absorber on rear suspension designs.
Monroe uses its highest grade, low fade oil for the GT Sport product. In fact, it's the same award-winning oil that's used for the GT Gas product and has been specifically tuned for Monroe shock absorbers world-wide.
The Monroe GT Sport range utilises multi-staged valving that is based on our award-winning Reflex technology to deliver optimum levels of performance, control and handling without sacrificing ride comfort.
The GT Gas product is designed specifically around the OE Spring and is a standard OE replacement product.
The GT Sport is specifically tuned to a firmer, heavier spring designed by King Springs and the valving has been altered accordingly.
In technical terms, the valving in the shock absorber has been modified to deliver a softer compression stroke, thus minimising any suspension harshness.
On rebound however, oil flow has been restricted to enable the shock absorber to better control the spring.
This is how we've engineered the Monroe GT Sport with both optimum performance and ride comfort characteristics - in contrast to many other lowered suspension products, which tend to deliver a harsh, 'crashy' ride ... or they sacrifice performance for ride.
The GT Sport Microcellular Polyurethane bump stop rubbers have been specifically engineered for the lowered product.
While most OE bump stops rubbers are hard, we've shortened and softened the bump stops to allow more travel and increase ride smoothness.
The GT Sport product can be used with other springs that are comparable to King Springs.
However, for optimum performance and ride height, Monroe recommends King Springs.
Lowered products of the past have been associated with a loss of ride comfort, but the GT Sport product ensures you can experience a sporty, lowered ride with improved handling characteristics as well as comfort and control.
This is achieved through intensive fine tuning of the shock absorber to the spring. The GT Sport is specifically tuned to a firmer, heavier spring designed by King Springs and the valving has been altered accordingly.
In technical terms, the valving in the shock absorber has been modified to deliver a softer compression stroke, thus minimising any suspension harshness.
Due to the improved suspension control, the steering will feel more responsive and no heavier than prior to the fitment of the GT Sport product.
The vehicle is only at risk of scrubbing if oversized tyres or the wrong offset rims are fitted to the vehicle.
Camber should also be checked and adjusted according to OE specifications whenever suspension or shock absorber changes are made. A camber adjustment kit may be required to achieve the correct settings.
The Monroe GT Sport and King Springs combination has been specifically designed to minimise 'bumpiness' yet retain its soft and sporty feel.
Yes. The GT Sport product will reduce body roll through the combination of the lower centre of gravity and enhanced damping rates.
As with any suspension change or modification it is important to ensure the correct wheel alignment settings are maintained to ensure maximum tyre life and maximum handling characteristics.
When fitting the GT Sport product load carrying ability must be considered to determine whether a 'Low' or 'Super Low' spring is appropriate. In most cases, vehicles fitted with the 'Low' springs will be best for light towing.
The length of the shock absorber plays no part in lowering the car. It's all down to the size of the spring.
When compared with original equipment springs and shock absorbers, the vehicle was an average of 25-30 millimetres lower for the Monroe GT Sport with a 'Low' spring and 40-50 millimetres when fitted with a 'Super Low' spring.
